Infrared Accelerated Curing System


Dramatically reduce curing time with REVO Speed. It quickly cures fillers and coatings completely from the inside out, saving significant time and money. This fast-positioning model is best suited for body shops that perform large volumes of average repairs on one to four panels. With a vehicle clearance of 7 feet, the REVO Speed can accommodate all sizes of passenger vehicles, including cars, trucks, minivans and SUVs, as well as factory lifted trucks.


Fast, Semi-Automatic Operation

Quickly and easily position the REVO Speed to automatically move based on specifications set into the control panel. There is no need to scan a vehicle or use special plates or markers. Simply place the REVO Speed at the beginning of a vehicle and it will move on its own. The unit returns back to its starting position with the touch of a button.

Increase Paint Shop Throughput

REVO Speed uses short wave, electric infrared curing technology to offer the fastest curing time in the industry for both prep and paint processes. It shortens repair cycle time and significantly reduces rework. Plus, it easily installs within existing shop footprints.

Quick Heating & Cooling Times

Lamps on the REVO Speed reach curing temperature almost instantly. Built in fans cool the unit down in seconds. The system can be turned on only when needed and is safe to touch shortly after being turned off.

Easy-to-Operate Controls

Simple-to-operate, high-tech controls make consistent, high-quality results easy. The travel speed and surface temperature are preset, so there’s no guesswork for technicians on cure time. Just select the type of material being cured and the lamp sections to be turned on/off during the cure process; then press start.

Expert Support & Service

All REVO Systems are backed by Global Finishing Solutions to provide support and reliability. Each system has been expertly designed specifically for the automotive repair industry. And with on-site training available, learning to use any REVO System is easy.

Saves Time & Money

Cures both filler and coatings from the inside out. REVO infrared curing technology creates a high-quality, complete cure using significantly less energy and reduces the out-of-dust time to just minutes. The ability to turn the lamps on and off helps save on energy and operating costs.

Want to learn more about revo speed?
Let us know your product requirements, and we will put you in touch with a distributor in your area.

ABOUT Infrared Curing Technology

Transforming Collision Repair

REVO Accelerated Curing Systems use short wave electric infrared technology, which provides significant throughput gains, energy cost savings and quality improvements.

Curing time for both prep and paint phases of repair can be reduced by hours, freeing up your technicians to complete additional repairs. There is no need to add accelerators to speed curing time; the fast dry time and complete cure from electric infrared curing technology delivers high quality results that reduce the need for rework.

Electric infrared energy costs are a fraction of the energy costs to run a conventional system. REVO systems take just a fraction of a second to heat up and are ready to cure a repair immediately. Cool down is also very quick so the systems can be turned on only when needed and are safe to handle shortly after shutdown.

REVO Systems deliver consistent, controlled heat. Temperature is precisely regulated by easy-to-operate controls. With short wave infrared curing technology, the drying energy is concentrated on only the panels needing repair and penetrates multiple layers of coatings to heat the substrate beneath. REVO Systems consistently cure primer, sealer and paint.

REVO-Integrated Paint Booths


The Ultra® XR Paint Booth is a premium downdraft spray booth that is integrated seamlessly with the REVO Speed — creating a top-of-the-line spraying and curing environment.
  • Integrated overhead rails allow the REVO Speed to move independently alongside the vehicle, curing coatings as it moves
  • Exclusive Controlled Airflow Ceiling for superior contamination control
  • Premium ceiling and vertical sidewall lighting
  • Intuitive LOGIC 4 controls with dual VFDs
  • Pressurized parking garage and pressurized power rails make the booth fully compliant with NFPA 33
Ultra XR Paint Booth


The Ultra® XR Closed-Top Open-Front (CTOF) is an end-to-end prep, paint and curing environment. By integrating REVO Systems into this versatile finishing environment, vehicles can be filled, primed, sealed, painted and rapidly cured in one location.
  • Built-in overhead rail system allows REVO Speed or Rapid to easily move alongside the vehicle or panels
  • Downdraft airflow with GFS’ exclusive Controlled Airflow Ceiling for superior contamination control
  • Dual-bay construction
  • Intuitive LOGIC 4 controls with dual VFDs
  • NFPA 33 compliant
Ultra XR with REVO Rapid on Rails CTOF
Ultra XR CTOF Booth



Learn how easy it is to use REVO Spot. Using short wave electric IR technology, these revolutionary systems cure filler and coatings quickly from the inside out. Cure time is reduced by hours, freeing up your technicians to complete additional repairs. The savings can easily get at least one more car to the paint department per day.

Customer Stories & Case Studies

Speed Up Your Operation with Infrared Drying Technology
Learn more about how short wave electric infrared drying technology can speed up your shop.
Translate »