For an exceptional spray environment, Global Finishing Solutions® (GFS) has a full line of light fixtures — LED, fluorescent, incandescent and explosion-proof. GFS also offers a full line of replacement light fixtures, bulbs and parts for all makes and models of finishing equipment, including paint booths, dust collection booths and blast booths.
T8 LED Lamps are an ideal energy saving choice for shops and businesses. LED Lamps are compatible with linear light fixtures from Global Finishing Solutions® (GFS) including inside access, corner and general purpose light fixtures. When retrofitting LEDs into existing GFS equipment, it’s as simple as changing out the tubes.
T8 LED Lamps offer significant energy savings – up to 40 percent when compared to traditional fluorescent 32W T8 systems. Lower energy consumption allows for short payback periods, making it more cost-effective to upgrade to LED. (Actual savings depend on your system configuration)
T8 LED Lamps emit virtually no ultraviolet or infrared light and don’t contain mercury, allowing for non hazardous waste disposal. Waste is minimized when switching to LEDs since the tubes can be installed in existing light fixtures.
You no longer have to worry about dropping and shattering your lamps. LED Lamps are glass-free, creating safer working conditions.
No need to wait for light fixtures to turn on. LED Lamps turn on instantly at full luminosity, with no flicker or buzz.
T8 LED Lamps can be easily integrated into any existing Global Finishing Solutions linear fluorescent paint booth fixtures. It’s as simple as changing out the tubes. No rewiring is required because the LED lamps use the existing electronics.
Your existing Global Finishing Solutions linear light fixtures maintain their original ETL listing when switching over to LED since LED Lamps use the existing electrical wiring.
LED lights last longer than traditional fluorescent bulbs, providing up to a 50,000 hour life span that eliminates the need to frequently replace the tubes.
GFS offers four- or six-tube T8 light fixtures that work interchangeably with high-output fluorescent or LED lamps.
| New Part No. | Old Part No. | Tube | Length | Lamp Size (Volt/Watt) |
| 1007089 | LABW12-4 | 4 | 4′ | 120-277V / 32W, includes tubes |
| 1007091 | LABW12-6 | 6 | 4′ | 120-277V / 32W, includes tubes |
| 1007090 | LABW12-4-LAM | 4 | 4′ | 120-277V / 32W, for blast booths only |
| 1007097 | LAR12-4 | 4 | 4′ | 120-277V / 32W, for dual-skin panels |
| 1007098 | LAR12-6 | 6 | 4′ | 120-277V / 32W, for dual-skin panels |
| 1011132 | 230-306 | 2 | 4′ | 120V / 32W |
| 1011138 | 230-501 | 4 | 4′ | 120-277V / 32W |
| 1007098 | LAR12-6 | 6 | 4′ | 120V, for dual-skin panels |
| 1011135 | 230-400 | 2 | 3′ | 120V / 25W |
| 1011136 | 230-405 | 4 | 3′ | 120V / 25W |
| 1007208 | LAB12-3-36 | 3 | 3′ | 120V / 32W |
| New Part No. | Old Part No. | Tube | Length | Lamp Size (Volt/Watt) |
| 1011140 | 230-551 | 4 | 4′ | 120V/32W |
| New Part No. | Old Part No. | Tube | Length | Lamp Size (Volt/Watt) |
| 1007094 | LAC12-4 | 4 | 4′ | 120-277V / 32W |
| 1007095 | LAC12-6 | 6 | 4′ | 120-277V / 32W |
| New Part No. | Old Part No. | Length | Type |
| 1052766 | 230-286B | 4′ | LED |
| 1011130 | 230-281 | 4′ | Fluor |
T5 fluorescent light fixtures and lamps from GFS feature excellent performance and efficiency. GFS offers four- or six-tube inside-access T5 fixtures, designed to fit the smaller diameter of T5 lamps. T5 fixtures and lamps are recommended for enclosures with high ceilings and booths located in areas that reach high temperatures.
New Part No. | Old Part No. | Tube | Length | Lamp Size (Volt/Watt) |
1007215 | LABW-14T5-D12 | 4 | 4′ | 120-277V / 54W |
1007216 | LABW-16T5-D12 | 6 | 4′ | 120-277V / 54W |
Replacement Tubes: Part No. 230-285
Incandescent fixtures are recommended for use in mix rooms and hazardous materials storage rooms. Angle fixtures can be supported for mounting at the face of a paint booth with a fixture bracket. Incandescent fixtures are Class I, Division 1 listed.
| New Part No. | Old Part No. | Description | Volt/Watt |
|---|---|---|---|
| 1010574 | 600-001 | Ceiling Mount with Dome | 150/300W |
| 1010575 | 600-002 | Wall Mount with Dome | 150/300W |
| 1010579 | 600-006 | Ceiling Mount with Angle | 150/300W |
Replacement Tubes: Part No. 230-147
Explosion-proof lighting is recommended for hazardous locations, such as paint booths, shipyards, chemical manufacturers, oil drilling rigs and gas processing plants. Made with factory sealed, cased aluminum, and a white finish reflector.
| New Part No. | Old Part No. | Tube | Length | Volt/Watt |
|---|---|---|---|---|
| 1019444 | 230-166 | 2 | 4′ | 120V/60W |
| 1019088 | 230-163 | 4 | 4′ | 120V/40W |
High bay fluorescent lights are specifically designed for general purpose applications and meant to replace metal-halide lighting and T-12 light fixtures to improve energy efficiency. GFS high bay lights are ideal for structures such as warehouses, commercial buildings and gymnasiums.
Increase the luminosity of your paint booth with this simple upgrade, available for GFS four- or six-tube fluorescent light fixtures. GFS’ unique reflector shape and material focuses more light where you need it, more efficiently directing light toward the working area of your paint booth. Light reflectors can easily be installed behind fluorescent light tubes, boosting the luminosity of fixtures by 20 percent. You can achieve the same level of luminosity with fewer bulbs than our competitors, saving energy and maintenance costs.
GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.
| OSHA – Occupational Safety and Health Administration |
| NFPA – National Fire Protection Association |
| ETL – Electrical Testing Labs |
| EPA – Environmental Protect Agency |
| ICC – International Code Council |
Let us know your product requirements, and we will put you in touch with a distributor in your area.
If your automotive body shop is attempting to obtain OEM certification, there is likely a long list of requirements. One item on the list that is often overlooked is the importance of high-quality lighting, as better visibility in your shop will help you produce a better finish and avoid costly rework, as well as give a better impression and assurance to customers.
There is a lot of area to illuminate in a heavy-duty truck paint booth, which is why your lighting should be engineered for optimal brightness and energy efficiency, in addition to meeting code requirements. After all, better lighting in your paint booth can go a long way toward achieving better paint finishes.
With most of the focus on increasing throughput and upgrading to the latest technology, the importance of excellent paint booth lighting is often overshadowed. It should be a high priority — as better visibility in your paint booth will help you produce a better finish.
Global Finishing Solutions will use the information you provide on this form to be in touch with you and to provide updates and marketing. You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at info@globalfinishing.com. We will treat your information with respect. For more information about our privacy practices please visit our privacy policy. By clicking below, you agree that we may process your information in accordance with these terms.
We use MailChimp as our marketing automation platform. By clicking below to submit this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.
