Aerospace & Defense Paint Booth Filters

Have Unused Money in This Year’s Budget? Stock Up on Filters

The right filters help keep your paint booth performing at its best. Global Finishing Solutions (GFS) offers replacement intake and exhaust filters backed by decades of paint booth engineering experience and designed for the demanding requirements of aerospace and defense finishing, where consistent airflow, finish quality and effective overspray capture are essential to keeping production on track. 

Aerospace and defense production schedules leave little room for avoidable interruptions. Plan ahead for upcoming maintenance and production schedules by reviewing your filter inventory. Keeping commonly used replacement filters in inventory helps maintenance teams stay ahead of routine changes and shifting production demands.

Avoid Costly Downtime with Routine Filter Changes

Need help identifying your booth filters?

Why Choose GFS Filters?

Filters are a critical part of an aerospace finishing operation. The right filtration helps maintain the controlled environment, airflow and overspray capture needed for demanding coatings and consistent results. 

Designed for Demanding Aerospace Finishes

GFS filtration supports the clean, controlled environment required for high-quality aerospace coatings, managing contaminants and overspray throughout the finishing process. 

Built to Support Consistent Booth Performance

Intake and exhaust filters work together to help maintain airflow and booth conditions, protecting finish quality and keeping production moving. 

Proven for Chromate-Containing Coatings

GFS three-stage filtration is designed specifically for aerospace chromate coatings, offering up to 99.9% filter efficiency at 5 microns and meeting applicable aerospace emissions requirements.

Backed by Aerospace Finishing Expertise

GFS designs finishing systems for military, commercial and business aircraft. That experience extends beyond the booth itself, giving customers a knowledgeable resource for identifying the correct replacement filters, sizes and quantities for their equipment.

Three Stages of Protection for Aerospace Finishing

Aerospace coatings require effective filtration from the beginning of the exhaust process to the end. GFS three-stage filtration progressively captures overspray as air moves through the exhaust system. Each stage removes additional material, helping maintain airflow and protecting the filters that follow. 

For operations using chromate-containing coatings, the complete system meets or exceeds EPA Method 319 emission standards for aerospace manufacturing and rework facilities. The system can also be used to upgrade many older two-stage finishing systems, making it possible to improve filtration without replacing your entire paint booth. 

Stage 1:

Capture the Heaviest Overspray

CPA paint arrestor roll media provides the first line of defense, capturing the majority of paint overspray before it reaches the remaining filters. The media is designed to hold captured material while allowing air to continue moving through the system. Printed markings also make it easier for operators to identify the correct installation direction.

Part No.

Size

Description

1011588

120” x 50’

CPA Paint Arrestor Roll Media

Stage 2:

Capture What Gets Through

MEPT panel filters provide the next level of filtration, capturing additional overspray before air reaches the final filter stage. These durable panel filters add another layer of protection while helping maintain proper airflow through the exhaust system.
Part No. Size Description
1011569 20” x 20” x 1” MEPT Panel Filter, 24/box
1011580 24” x 24” x 1” MEPT Panel Filter, 24/box
 

Stage 3:

Final Filtration Before Exhaust

Six-pocket bag filters provide the final stage of filtration before exhaust air leaves the system. Designed for high-efficiency filtration, these filters capture the remaining material that passes through the first two stages and help minimize the potential for overspray to bypass the filter.

Part No.SizeDescription
101157320” x 20” x 12”Six-Pocket Final-Stage Bag Filter
101157924” x 24” x 12”Six-Pocket Final-Stage Bag Filter

Cleaner Air In. Better Finishes Out.

Good filtration doesn’t start at the exhaust. Intake filters help remove dust and other airborne contaminants before air enters the booth, creating a cleaner environment for painting and helping protect finish quality. For aerospace and defense applications where consistency matters, maintaining your intake filters is just as important as maintaining your exhaust filters. 

Part No. Size Description
1011590 20” x 20” x 1” SFR Panel Intake Filter, 24/box
1011591 24” x 24” x 1” SFR Panel Intake Filter, 24/box

Stock Up Now.

Stay Ahead of Your Next Filter Change.

Filters are one of the most frequently replaced components in a paint booth. Waiting too long to change them can impact the entire finishing process. As filters become loaded with paint and contaminants, airflow can decrease, affecting booth performance, finish quality and production. 

A filter change shouldn’t become an emergency. Keeping the correct replacement filters on hand makes routine maintenance easier and helps your team prepare for upcoming production and changing workloads. 

Take a few minutes to review your filter inventory and identify what you’ll need for your next maintenance cycle. Not sure which filters fit your equipment? GFS can help identify the correct replacements and confirm the sizes and quantities you need. 

Sign Up for Our Newsletter
GFS Free Guide Transforming Your Prep Area
Transforming Auto Refinish Prep

Discover the technical advancements that have heightened the importance of the prep area