4 Considerations When Purchasing a Gas or Electric Industrial Oven

4 Considerations When Purchasing a Gas or Electric Industrial Oven

If you are in the market for an industrial oven, a gas burner is often the preferred choice over an electric heater because of the lower capital investment, smaller operational costs and established utilities within a facility. However, electric ovens have a distinct advantage over gas due to increased efficiency for low-temperature applications.

Several considerations must be taken when choosing between a gas and electric oven, as your decision will have a direct impact on your business’ financial and production capabilities. Here are four things to know about gas and electric ovens:

1. Gas Ovens Can Be Cheaper Overall Than Electric Ovens

Small, low-end electric ovens are cheaper to purchase than gas ovens, and large, high-end electric ovens are also cheaper than their gas counterparts. But for the majority of mid-range industrial ovens, gas burners are cheaper to purchase and run than electric heaters. That is largely because electric ovens are indirect-fired, meaning the air is heated indirectly, as the burner is fired into a heat exchanger. Gas ovens are direct-fired — the burner is fired directly into the process air stream to heat it.

In recent years, the cost of gas in the U.S. has been less than the cost of electricity. This drives most industrial manufacturers to select gas ovens over electric ovens, as the operational cost of electricity is so much higher.

However, it is not uncommon for industrial facilities to have electricity but not gas service. The one-time cost of adding gas is typically less than the long-term cost of operating an electric oven. Many facilities also lack the established utilities to handle the high amp draw required to run an electric oven.

In 2018, JAS Powder Coating of Fort Lauderdale, Florida, replaced their existing gas oven with a 34-foot-long, gas-powered Batch Process Oven from Global Finishing Solutions (GFS). Over the past year, they have increased their throughput by 150 percent and decreased their fuel cost by $7,000. This shows that increased efficiency and cost savings can be realized even when comparing gas ovens.

2. Gas Ovens Require Explosion Relief

Another factor to consider when comparing gas and electric ovens is explosion relief. Explosion relief is needed with a gas oven but not an electric oven. Since gas ovens are direct-fired, there is always the risk of an explosion. This risk is not present with indirect-fired electric ovens.

Incorporating explosion relief requires additional installation time and money. This expense is not associated with electric ovens.

3. Electric Ovens Are More Efficient at Low Temperatures

Temperature control is superior in electric ovens compared to gas ovens. When the temperature in a gas oven dips to 140-150 degrees Fahrenheit, the burner cycles on and off, and it must be constantly relit. To keep the oven operational, the exhaust rate must be increased so that the oven heats more air, which lowers the temperature inside the oven. This makes the oven less efficient.

“With an electric oven, you can turn the temperature down as low as you want and you are still moving air,” said Ben Kinzel, GFS mechanical engineer. “With a gas oven, there is always a minimum temperature that you must maintain.”

4. Canada Has More Stringent Code Requirements

Compared to the U.S., there are stricter code requirements in Canada for gas-fired equipment. Canadian officials require ETL-C listings for gas-fired ovens, but since a majority of GFS ovens are custom, they are not listed. That means third-party inspections are required in Canada to ensure code compliance for gas-fired ovens.

Choosing Between Gas & Electric Ovens

If low-temperature applications are the norm for your operation, an electric oven is the better choice because of the increased efficiency. Not requiring explosion relief also cuts equipment costs, as well as time during installation. The downside of electric ovens is that operational costs are high when curing products at high temperatures is needed, and most facilities are not constructed to withstand the large amp draw of an electric oven. Operational costs of gas ovens are relatively low, but explosion relief is needed, and they are not as efficient when running at low temperatures.

The decision on whether to choose a gas or electric oven typically comes down to whether a manufacturer needs an electric heater for low-temperature applications or only needs a small oven. If not, a gas oven is generally better in the long run.


Take a look inside Nautilus Abrasive Blasting & Powder Coating’s new Batch Process Oven:

WANT TO LEARN MORE ABOUT OUR PRODUCTS?

Let us know your product requirements, and we will put you in touch with a distributor in your area.

RELATED POSTS
News

Top 5 Blog Posts of 2023

As we look forward to what 2024 has in store, we pause to look back on 2023. In case you missed them, here are our top five blog posts of 2023.

Read More »
Automotive Refinish

GFS at SEMA 2023: Edge Up Your Paint Shop

GFS is excited to return to the SEMA Show to meet with body shop owners, managers, technicians and automotive refinish professionals. Visit GFS Booth #31067 from Oct. 31 to Nov. 3, 2023 in Las Vegas to learn how GFS can enable your shop to be more productive, efficient and profitable, while achieving flawless paint finishes.

Read More »
Automotive Refinish

Excellence Reimagined: New Auto Refinish Paint Booth From Global Finishing Solutions Introduced to Market

GFS is proud to introduce the Edge Paint Booth, which provides industry-leading features with an updated, modern design, while being backed by a manufacturer with decades of experience in the automotive refinish industry. Masterfully designed for today’s collision repair centers and paint shops, GFS Edge delivers advanced controls; precise, adjustable lighting; and premium contamination control to consistently produce excellent paint finishes and improved throughput.

Read More »
Automotive Refinish

Ultra XS Paint Booth a “Wow Factor” for Ministry Helping At-Risk Teens

Targeting junior high and high school students, the Crossover Restoration Foundation aims to provide an avenue for at-risk teenagers to turn around their lives. The past seven years, JB Baldridge has worked to get the ministry up and running. He finally is nearing that point, thanks to the addition of an Ultra XS Paint Booth from GFS.

Read More »
Automotive Refinish

“Potential is There for More Throughput” with Dual-Bay CTOF Booth at ABRA Faribault

With a shop expansion underway at ABRA Faribault, three things were priorities for body shop general manager Aaron Kasparek — increased flexibility, more space and better contamination control. Check, check and check, mostly thanks to a dual-bay Ultra XD Closed-Top Open-Front (CTOF) Booth from GFS that was paired with an Ultra XD Paint Booth and Ultra XD Paint Mix Room in hopes maximized productivity boosts the bottom line.

Read More »

Newsletter Signup

Global Finishing Solutions will use the information you provide on this form to be in touch with you and to provide updates and marketing. You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at info@globalfinishing.com. We will treat your information with respect. For more information about our privacy practices please visit our privacy policy. By clicking below, you agree that we may process your information in accordance with these terms.