Galvanized Paint Mix Rooms from Global Finishing Solutions® (GFS) provide a controlled area for safely mixing paint. Wall panels are fabricated from 18-gauge unpainted galvanized sheet steel, and are pre-punched and companion flanged for easy nut-and-bolt, on-site assembly. Our Mix Rooms also contain a convenient 4-inch deep, built-in containment base for potential spills.
GFS’ Industrial Paint Mix Rooms are constructed with single-skin, 18-gauge, G-90 galvanized steel.
Pre-punched panels with nut-and-bolt assembly takes the guesswork out of installing a mix room, and provides more structural integrity.
ETL and ETL-C Listed
Standard galvanized Paint Mix Rooms from GFS are fully ETL and ETL-C listed to meet all applicable industry safety and performance requirements and facilitate successful inspections.
Airflow & Filtration
A proven ventilation system, fresh air flows continuously throughout the mix room to protect personnel from inhaling harmful vapors. Pulled from outside of the mix room, air flows through filters to remove dust and dirt contaminants. The continuously moving downflow of air inside the mix room forces harmful vapors into the exhaust plenum and away from the employees.
Safe Liquid Guidelines
Per NFPA 33, businesses may store up to 2 gallons of flammable or combustible liquid per square foot of enclosure floor area in a Paint Mix Room, with a maximum storage of:
60 gallons for Paint Mix Rooms within 6 feet of the spray area (US)
300 gallons for Paint Mix Rooms further than 6 feet from the spray area (US)
Air is drawn from outside of paint mix room and flows through filters to remove dust and dirt contaminates. The down flow of continuously moving air inside the enclosure forces harmful vapors safely down and through the exhaust plenum.
Room Air Exchange
The chart below identifies the air exhaust performance data when Mix Rooms are properly installed and are outfitted with clean filters. Airflow at 680 cfm meets the optimum air exchange rating.
Air Exchange per hr
Each Paint Mix Room ships with the following:
Personnel door with an 18-by-24-inch observation window
High-efficiency, T8 fluorescent light fixture(s)
Assembly hardware and installation drawings
White, pre-coated panels
GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.
Per NFPA, paint mix rooms MUST contain an automatic fire extinguishing system. GFS does not supply these systems.
Want to learn more about industrial paint mix rooms?
Let us know your product requirements, and we will put you in touch with a distributor in your area.