BT1200 Heat Unit
The highly versatile BT1200 heat unit from Global Finishing Solutions® (GFS) can be placed on the side or rear of a paint booth. The heater is available in both recirculating and forced-dry models.
| Pre-filtration |
| Side- or rear-mounted |
| Automatic pressure control (Auto Balance) |
| Dual VFDs |
| Dual high-limit switches |
| 24V door safety interlock switch |
| Engage control panel |
| 34-inch-round intake and exhaust duct for 15-foot roof |
| 15 hp motor upgrade |
| 1.5 MBTU upgrade |
| LOGIC 3 or LOGIC 4 control panel |
| Filter monitoring |
| Semi-downdraft recirculation package (90/10) |
| LoNox burner |
| Low pressure burner |
| Intake Motor | 10 hp direct-drive |
| Exhaust Motor | 7.5 hp belt-driven |
| Intake Fan | Airfoil, centrifugal |
| Exhaust Fan | 34″ tube axial |
| Direct-Fire Aluminum Burner | 1.2 MBTU (natural gas or propane fuel) |
| VFD | 7.5 hp exhaust |
| Intake Motor | 10 hp direct-drive |
| Exhaust Motor | 7.5 hp direct-drive |
| Intake Fan | Airfoil, centrifugal |
| Exhaust Fan | 34″ tube axial |
| Direct-Fire Aluminum Burner | 1.2 MBTU (natural gas or propane fuel) |
| VFD | Dual VFD (10 hp intake and 7.5 hp exhaust) |
GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries in which we work. One of our engineers serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.
| OSHA – Occupational Safety and Health Administration |
| NFPA – National Fire Protection Association |
| ETL – Electrical Testing Labs |
| EPA – Environmental Protection Agency |
| ICC – International Code Council |
This high-efficiency fan maintains consistent airflow, even when filters load up and cause increased resistance. Inferior fans cannot withstand the pressure.
The aluminum, non-sparking airfoil design delivers higher performance while consuming far less energy. The fan requires much less maintenance because there are no belts, pulleys and bearings to replace.
With a high turndown ratio and faster cabin temperature rise, direct-fire burners are more efficient than indirect heat exchangers. The direct-fire burner is made of corrosion-resistant aluminum for reduced maintenance and longer life.
By using variable frequency drives (VFDs) and an innovative pressure transducer, GFS has eliminated the need for dampers to balance the paint booth. This allows for better performance and less maintenance.
Let us know your product requirements, and we will put you in touch with a distributor in your area.
