Industrial Paint Mix Room

Galvanized Paint Mix Room for Safely Mixing Paint


Industrial Paint Mix Rooms from Global Finishing Solutions® (GFS) provide a safe, controlled area for mixing paint. Wall panels are fabricated from 18-gauge galvanized or pre-coated white sheet steel, and are pre-punched and companion flanged for easy, on-site, nut-and-bolt assembly. GFS Industrial Paint Mix Rooms contain a convenient, built-in, 4-inch-deep containment base for capturing potential spills.


Most Commonly Used For


Industrial Paint Mix Room Product Info

Safe Air OperationBefore entering the GFS Industrial Paint Mix Room, fresh air flows through high-efficiency filters to remove dirt and dust contaminants. Air flows continuously through the enclosure and into the exhaust plenum, helping to protect personnel from harmful vapors.
Solid ConstructionPre-punched panels with nut-and-bolt assembly take the guesswork out of installing the GFS Industrial Paint Mix Room, in addition to providing more structural integrity.
ETL and ETL-C ListedGFS Industrial Paint Mix Rooms are fully ETL and ETL-C listed to meet all applicable industry safety and performance requirements, and facilitate successful inspections.
Safe Storage Guidelines

The amount of flammable or combustible liquid stored in paint mix rooms must be within the following limits, per NFPA 33:

  • Paint mix rooms within 6 feet of the spray area may contain up to 2 gallons per square foot of enclosure floor area, but the combined quantities of liquids in the spray area and mix room shall not exceed 120 gallons
  • Paint mix rooms farther than 6 feet from the spray area may contain up to 2 gallons per square foot of enclosure floor area, but shall not exceed 300 gallons
  • If more than one paint mix room is installed, the total quantity of liquids shall not exceed the amounts outlined above
Personnel door with observation window
High-efficiency, T8 LED light fixture(s)
4-inch-deep containment base for potential spills
1/2 hp TEFC motor
Heavy-duty exhaust fan
3-by-5-foot PIG Grippy Mix Room Mat
Control panel
Intake fan (for pressurization)
Exhaust ductwork
Booth connection vestibule

GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries in which we work. One of our engineers serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.

OSHA – Occupational Safety and Health Administration
NFPA – National Fire Protection Association
ETL – Electrical Testing Labs
EPA – Environmental Protection Agency
ICC – International Code Council

Rotating Booth Access Turntable

An easy way to move paint supplies in and out of an industrial paint booth is with a Rotating Booth Access Turntable. Installed into the wall connecting your paint booth and paint mix room, this GFS-exclusive booth accessory allows for the quick transfer of premixed paint and supplies. One technician can be mixing paint or preparing supplies while another technician is spraying, increasing productivity and throughput.

Want to learn more about Industrial Paint Mix Rooms?

Let us know your product requirements, and we will put you in touch with a distributor in your area.

Customer Success Stories

Related Products

Sign Up for Our Newsletter