DEAL DAY
FINAL
Friday, July 11
Global Finishing Solutions® (GFS) offers a wide variety of filters for paint booths, ovens, washers and other finishing equipment. Dedicated to providing top-quality filters, most are kept in stock for quick turnaround and fast shipping to virtually any location across North America. GFS’ quest for product quality and performance has resulted in a complete line of filters that have been designed and manufactured for durability and long-lasting, trouble-free service.
GFS Wave® is an economical, high-performance exhaust filtration solution for businesses of all sizes and production levels. The convoluted “wave” design of GFS Wave filters increases surface area for great depth loading and holding capacity.
By effectively capturing and retaining overspray, GFS Wave filters minimize paint run-off. This results in less cleanup of the paint booth floor and quicker, more efficient filter changes.
| New Part No. | Size | Quantity per Box |
| 1008075 | 20″ x 20″ | 30 |
| 1008077 | 20″ x 25″ | 30 |
| New Part No. | Size | Quantity per Box |
| 1008078 | 20″ x 30′ | 1 roll |
| 1008079 | 24″ x 30′ | 1 roll |
| 1008080 | 30″ x 24′ | 1 roll |
| 1008081 | 30″ x 30′ | 1 roll |
| 1008083 | 30″ x 50′ | 1 roll |
| 1050843 | 30″ x 60′ | 1 roll |
| 1008084 | 36″ x 30′ | 1 roll |
| 1050844 | 36″ x 60′ | 1 roll |
| 1008086 | 40″ x 30′ | 1 roll |
| 1008087 | 45″ x 30′ | 1 roll |
| 1013183 | 45″ x 48′ | 1 roll |
| 1008089 | 48″ x 30′ | 1 roll |
| 1050845 | 48″ x 60′ | 1 roll |
| 1008091 | 54″ x 30′ | 1 roll |
| 1008092 | 60″ x 30′ | 1 roll |
| 1050846 | 60″ x 60′ | 1 roll |
| 1008094 | 80″ x 20′ | 1 roll |
High-performance polyester media is designed for capturing overspray of paint, glue, resin, tar, teflon, oil, grease and other airborne liquid particles. Made from 1-inch-thick, multi-layered, multi-density polyester, it features high-capacity capture with high-efficiency air pollution control. The media is UL listed, Class II approved and meets OSHA requirements.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011603 | 217-006 | 20″ x 20″ | 30 |
| 1011622 | 217-041 | 24″ x 24″ | 25 |
| 1011583 | 216-532 | 72″ x 2″ x 50′ | 1 roll |
| 1017354 | 216-561 | 24″ x 50′ | 1 roll |
| 1017351 | 216-562 | 48″ x 50′ | 1 roll |
| 1017350 | 216-563 | 36″ x 75′ | 1 roll |
| 1017349 | 216-564 | 48″ x 75′ | 1 roll |
| 1017348 | 216-565 | 60″ x 75′ | 1 roll |
Used to filter intake and exhaust air for GFS ovens, panel filters are available in wood or metal frames. The filters are designed to capture overspray that was not retained by the exhaust filtration media, helping maintain a cleaner environment and avoid overspray in exhaust fan blades.
| New Part No. | Old Part No. | Frame | Size | Quantity per Box |
| 1011506 | 217-518 | Metal | 24″ x 24″ x 12″ | 1 |
Gold polyester exhaust filters are made from multi-layered, multi-density polyester. Featuring high efficiency and excellent paint holding capacity, gold polyester filters are a cost-effective replacement filter media for any paint booth.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1008074 | FIL-EPP-2020-G | 20″ x 20″ | 30 |
| 1008076 | FIL-EPP-2025-G | 20″ x 25″ | 30 |
| 1008082 | FIL-ERP-3050-G | 30″ x 50′ | 1 roll |
| 1008085 | FIL-ERP-3650-G | 36″ x 50′ | 1 roll |
| 1008088 | FIL-ERP-4550-G | 45″ x 50′ | 1 roll |
| 1008090 | FIL-ERP-4850-G | 48″ x 50′ | 1 roll |
| 1008093 | FIL-ERP-6050-G | 60″ x 50′ | 1 roll |
Fiberglass exhaust filters are exclusively designed to collect paint overspray. Made from continuous filament glass fibers with an open-weave pattern, the filters allow particles to penetrate deep into the 2-inch-thick pad to hold more paint. The filters are UL listed and Class II approved.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011599 | 217-001 | 20″ x 20″ | 100 |
| 1011600 | 217-002 | 20″ x 25″ | 100 |
| 1011611 | 217-016 | 40″ x 75′ | 1 roll |
| 1011612 | 217-017 | 30″ x 75′ | 1 roll |
| 1011613 | 217-019 | 42″ x 75′ | 1 roll |
| 1011614 | 217-020 | 24″ x 75′ | 1 roll |
| 1011615 | 217-021 | 36″ x 75′ | 1 roll |
| 1011616 | 217-022 | 48″ x 75′ | 1 roll |
| 1011617 | 217-023 | 60″ x 75′ | 1 roll |
| 1011618 | 217-024 | 72″ x 75′ | 1 roll |
| 1011619 | 217-025 | 84″ x 75′ | 1 roll |
| 1011621 | 217-029 | 42″ x 300′ | 1 roll |
| 1011625 | 217-080 | 60″ x 300′ | 1 roll |
| 1011629 | 217-088 | 48″ x 300′ | 1 roll |
| 1011630 | 217-089 | 84″ x 300′ | 1 roll |
| 1011631 | 217-095 | 36″ x 300′ | 1 roll |
Intake pads are a high-efficiency mesh intake filter that removes more than 90 percent of particles at 5 microns. They feature an internally welded steel frame for easy fit, with a self-sealing gasket. Internal wire support and heat-sealed seams prevent media flutter. The pads are UL listed and Class II approved.
| New Part No. | Old Part No. | Size | Description | Quantity |
| 1011590 | 216-550 | 20″ x 20″ x 1″ | Intake Diffusion | 24 |
| 1011591 | 216-551 | 24″ x 24″ x 1″ | SFR Filter | 24 |
| 1011604 | 217-010 | 16″ x 20″ x 1″ | Intake Tacky | 24 |
| 1011605 | 217-011 | 16″ x 25″ x 1″ | Intake Diffusion | 24 |
| 1011606 | 217-012 | 20″ x 20″ x 1″ | Intake Tacky | 24 |
| 1011607 | 217-012-Green | 20″ x 20″ x 1″ | Intake Tacky (green) | 24 |
| 1011608 | 217-013 | 20″ x 25″ x 1″ | Intake Tacky | 24 |
| 1011609 | 217-014 | 24″ x 24″ x 1″ | Intake Tacky (rigid metal frame) | 24 |
| 1011505 | 217-200 | 20″ x 48″ x 2″ | Intake | 8 |
| 1006386 | PF-1000 | 20″ x 48″ | Micro Clean (can be used in paint mix rooms) | 12 |
| 1006388 | PF-2000 | 20″ x 48″ | Micro Clean | 15 |
Made from synthetic fibers and resin-bonded with a special adhesive, tacky roll media intake filters are a progressively structured, high-performance media. The pads feature an internally welded steel frame for easy fit, with a self-sealing gasket. The filters are self-extinguishing, with a 100 percent coating of fibers. Tacky roll media is UL listed and Class II approved.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011689 | 216-234 | 55″ x 96″ | 2 rolls |
| 1011690 | 216-237 | 55″ x 120″ | 2 rolls |
| 1011581 | 216-528 | 50″ x 90′ | 1 roll (ME1 polyester media) |
| 1011582 | 216-531 | 50″ x 30′ | 1 roll (ME1 polyester media) |
High-temperature roll media is designed for use with SmartCure® control systems, which generate higher heat during cure cycles. Filter material can withstand operating temperatures up to 220 degrees Fahrenheit. Its polyester fiber is bonded with a polyvinyl chloride binder, featuring a flame-retardant treatment.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1007998 | FMI-CUSTOM | By the square foot | |
| 1008000 | FMI21036 | 21″ x 36″ | 2 |
| 1021055 | FMI21069 | 21″ x 69″ | 2 |
| 1008001 | FMI21072 | 21″ x 72″ | 1 |
| 1021056 | FMI21105 | 21″ x 105″ | 2 |
| 1021057 | FMI21141 | 21″ x 141″ | 2 |
| 1008004 | FMI21144 | 21″ x 144″ | 2 |
| 1008008 | FMI37036 | 37 1/2″ x 36″ | 2 |
| 1008009 | FMI37144 | 37 1/2″ x 144″ | 2 |
| 1008010 | FMI38062 | 38″ x 62″ | 1 |
| 1018331 | FMI51097 | 51″ x 97″ | 1 |
| 1013941 | FMI51108 | 51″ x 108″ | 1 |
| 1014023 | FMI51121 | 51″ x 121″ | 2 |
| 1008011 | FMI61120 | 61″ x 120″ | 2 |
| 1008016 | FMI61149 | 61″ x 149″ | 2 |
| 1008013 | FMI64108 | 64″ x 108″ | 2 |
| 1008014 | FMI64120 | 64″ x 120″ | 2 |
| 1008015 | FMI64144 | 64″ x 144″ | 2 |
| 1008016 | FMI64149 | 64″ x 149″ | 2 |
| 1018332 | FMI69097 | 69″ x 97″ | 1 |
| 1018473 | FMI69121 | 69″ x 121″ | 1 |
| 1008017 | FMI75030 | 75″ x 30″ | 2 |
| 1008018 | FMI75036 | 75″ x 36″ | 2 |
| 1021058 | FMI73069 | 73″ x 69″ | 1 |
| 1021059 | FMI73105 | 73″ x 105″ | 1 |
| 1021060 | FMI73141 | 73″ x 141″ | 1 |
| 1018473 | FMI69121 | 69″ x 121″ | 1 |
| 1008018 | FMI75036 | 75″ x 36″ | 2 |
| 1056005 | FMI75090 | 75″ x 90″ | 2 |
| 1008019 | FMI75120 | 75″ x 120″ | 2 |
| 1008020 | FMI75144 | 75″ x 144″ | 2 |
| 1008021 | FMI75149 | 75″ x 149″ | 1 |
| 1008022 | FMI78246 | 78 3/4″ x 246″ | 1 |
| 1008023 | FMI81036 | 81″ x 36″ | 2 |
| 1013505 | FMI81072 | 81″ x 72″ | 1 |
| 1008024 | FMI81108 | 81″ x 108″ | 1 |
| 1008026 | FMI81144 | 81″ x 144″ | 1 |
AdvanceCure® Accelerated Airflow Systems require their own filters, since the air intake is sized differently than other systems. The air entering the AdvanceCure System is filtered, ensuring clean air is blown out onto freshly painted vehicles. The filters are made of high-loft, non-woven, expanded polyester, featuring a 99.84 percent average arrestance. They’re UL listed and Class II approved.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1010333 | ADV-4MW-FMI1116 | 10.875″ x 16.25″ | 10 |
| 1007996 | FMI-ACCT0811 | 10.5″ x 7.75″ (corner module without lights) | 10 |
| 1007997 | FMI-ACCT2671 | 13″ x 9.5″ (corner module with lights) | 10 |
| 1014080 | FMI-AC041811 | 15.25″ x 24.25″ (corner module) | 10 |
| 1007999 | FMI-WBTA2362 | 17″ x 7.5″ x 5.25″ | 10 |
| 1019524 | FMI-AC1515 | 14.625″ x 14.626″ | 10 |
| 1018261 | FMI-ACCT1637 | 15.5″ x 36.625″ | 2 |
GFS’ high-efficiency, three-stage filtration system delivers a higher holding capacity and more cost savings than other systems. It is highly effective at capturing high volumes of paint and dust, with up to 99.9 percent filter efficiency at 5 microns. The system is used for aerospace chromate coatings and meets NESHAP requirements.
Air enters through a layer of multi-layered polyester roll media, constructed of a mixture of lofted denier fiber. Air leaves the media through a mixture of heavily needled media to densify, weighing 1.2 ounces per square foot.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011570 | 216-502 | 36″ x 50′ | 1 roll |
| 1011571 | 216-503 | 45″ x 50′ | 1 roll |
| 1011578 | 216-512 | 50″ x 50′ | 1 roll |
| 1011583 | 216-532 | 72″ x 50′ | 1 roll |
| 1011586 | 216-539 | 45″ x 75′ | 1 roll |
| 1011584 | 216-535 | 72″ x 75′ | 1 roll |
| 1011587 | 216-541 | 102″ x 75′ | 1 roll |
| 1011588 | 216-543 | 120″ x 50′ | 1 roll |
| 1011589 | 216-547 | 54″ x 75′ | 1 roll |
| 1017349 | 216-564 | 48″ x 75′ | 1 roll |
| 1017348 | 216-565 | 60″ x 75′ | 1 roll |
The filter panel features two different layers of tackified polyester media, sealed together so the tackified layers of each media touch in the center. Air enters through a multi-layered, multi-density polyester with a heavy, non-migrating tackifier on the air-leaving side. Air leaves through media that is constructed of a heavily needled polyester, densified up to ¼-inch thick and tackified on the air-entry side with a weight of 0.42 ounces per square foot.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011569 | 216-501 | 20″ x 20″ | 24 |
| 1011580 | 216-517 | 24″ x 24″ | 24 |
A bag filter helps capture overspray to increase efficiency. It features a composite of pre-filter, melt-blown and spun-bound polyester fibers. The pockets are sewn together on the perimeter with two heat seals, forming three air channels in each bag pocket. The bag pockets on the metal support are inserted into a galvanized metal header, which contains a sealing agent inside of each header to eliminate the possibility of paint bypass within the filter.
| New Part No. | Size | Quantity per Box |
| 1011573 | 20″ x 20″ x 12″ (6-pocket) | 1 |
| 1011579 | 24″ x 24″ x 12″ (6-pocket) | 1 |
| 1033525 | 20″ x 20″ x 12″ (6-pocket) | 1 |
GFS Wave® is an economical, high-performance exhaust filtration solution for businesses of all sizes and production levels. The convoluted “wave” design of GFS Wave filters increases surface area for great depth loading and holding capacity.
By effectively capturing and retaining overspray, GFS Wave filters minimize paint run-off. This results in less cleanup of the paint booth floor and quicker, more efficient filter changes.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1008084 | FIL-ERP-3630-W | 36″ x 30′ | 1 roll |
| 1008087 | FIL-ERP-4530-W | 45″ x 30′ | 1 roll |
| 1008089 | FIL-ERP-4830-W | 48″ x 30′ | 1 roll |
| 1008091 | FIL-ERP-5430-W | 54″ x 30′ | 1 roll |
| 1013183 | FIL-ERP-4548-W | 45″ x 48′ | 1 roll |
| 1008083 | FIL-ERP-3050-W | 30″ x 50′ | 1 roll |
The filter panel features two different layers of tackified polyester media, sealed together so the tackified layers of each media touch in the center. Air enters through a multi-layered, multi-density polyester with a heavy, non-migrating tackifier on the air-leaving side. Air leaves through media that is constructed of a heavily needled polyester, densified up to ¼-inch thick and tackified on the air-entry side with a weight of 0.42 ounces per square foot.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011569 | 216-501 | 20″ x 20″ | 24 |
| 1011580 | 216-517 | 24″ x 24″ | 24 |
A bag filter helps capture overspray to increase efficiency. It features a composite of pre-filter, melt-blown and spun-bound polyester fibers. The pockets are sewn together on the perimeter with two heat seals, forming three air channels in each bag pocket. The bag pockets on the metal support are inserted into a galvanized metal header, which contains a sealing agent inside of each header to eliminate the possibility of paint bypass within the filter.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011696 | 216-500 | 20″ x 20″ x 15″ (2-pocket) | 1 |
| 1011573 | 216-505 | 20″ x 20″ x 12″ (6-pocket) | 1 |
| 1011579 | 216-516 | 24″ x 24″ x 12″ (6-pocket) | 1 |
| 1033525 | 216-061 | 20″ x 20″ x 12″ (6-pocket) | 1 |
GFS Wave® is an economical, high-performance exhaust filtration solution for businesses of all sizes and production levels. The convoluted “wave” design of GFS Wave filters increases surface area for great depth loading and holding capacity.
By effectively capturing and retaining overspray, GFS Wave filters minimize paint run-off. This results in less cleanup of the paint booth floor and quicker, more efficient filter changes.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1008084 | FIL-ERP-3630-W | 36″ x 30′ | 1 roll |
| 1008087 | FIL-ERP-4530-W | 45″ x 30′ | 1 roll |
| 1008089 | FIL-ERP-4830-W | 48″ x 30′ | 1 roll |
| 1008091 | FIL-ERP-5430-W | 54″ x 30′ | 1 roll |
| 1013183 | FIL-ERP-4548-W | 45″ x 48′ | 1 roll |
| 1008083 | FIL-ERP-3050-W | 30″ x 50′ | 1 roll |
Part No. 1023869 – 20″ x 20″ x 4″, 6 filters per box
Part No. 1023869 – 24″ x 24″ x 12″
| New Part No. | Description | Quantity per Box |
| 1024725 | 19.375″ x 19.375″ x 11.5″ | 1 |
| 1013872 | 20.875″ X 20.875″ X 11.5″ | 1 |
| 1013638 | 23.375″ x 23.375″ x 11.5″ | 1 |
Air Make-Up Unit (AMU) filters clean the air entering an AMU and the fabric, helping provide AMUs with an economical source of replacement air.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1010774 | 405213 | 23 1/4″ x 47″ x 9″ (6-pocket) | 4 |
| 1010775 | 405214 | 23 1/2″ x 47″ (framed 5-pocket) | 4 |
| 1010776 | 405216 | 19 1/4″ x 37″ x 4″ (high capacity) | 4 |
| 1010777 | 405219 | 19 1/2″ x 36 3/4″ (6-pocket) | 4 |
| 1008028 | FMP2336 | 23 1/2″ x 35 5/8″ (4-pocket) | 4 |
Paper mesh filters are combination baffle/strainer-type overspray collectors, constructed of layers of slit and UL listed, Class II approved kraft media. The front layers employ larger baffle openings, followed by layers of progressively smaller diamond designs and an optional back layer of dense, non-woven polyester.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011666 | 216-088 | 20″ x 20″ x 1″ | 60 |
| 1011667 | 216-095 | 42″ x 2″ x 30′ | 1 |
Pleated cardboard is an accordion-style, collapsible paper filter with round holes that traps overspray and reduces filter replacement cost. Overspray-laden air is drawn into the filter by the booth’s fan and makes several radical directional changes as it’s forced through the trapping chambers of the filter. Kinetic energy generated by each change in air direction causes individual paint particles to be deposited on the surfaces within the filter.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1006498 | PEF-330-K1 | 3′ x 30′ | 1, 3 or 60 |
Paper mesh polyester backing paper filters are highly efficient with an excellent dust-holding capacity. Constructed of seven-layer expanded paper, they feature a white polyester backing to maximize strength and efficiency.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1008390 | EF-2020-K40 | 20″ x 20″ x 2″ | 40 |
| 1008391 | EF-2025-K40 | 20″ x 25″ pad | 40 |
| 1008392 | EF-3125-K2 | 31″ x 25′ roll | 2 |
| 1008393 | EF-4253-K1 | 42″ x 53′ roll | 1 |
Medium-efficiency, pleated panel filters for powder and dust collection are made of a non-woven cotton/synthetic blend media. They feature radial pleat construction, allowing for minimum pressure. Filter pads are UL and CUL listed, and Class I and Class II approved.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011654 | 216-003 | 20″ x 20″ x 4″ | 6 |
| 1011655 | 216-011 | 20″ x 20″ x 2″ | 1 |
| 1011656 | 216-013 | 20″ x 25″ x 2″ | 1 |
| 1023869 | 216-511 | 20″ x 20″ x 4″ | 6 |
Powder and dust bag filters are pocketed with individual edges and internal dividing bars that are heat-sealed for no stitch holes. Pockets are assembled using individual modular design, and the exceptionally high dust-holding capacity provides a long filter life.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011572 | 216-504 | 20″ x 20″ x 15″ (2-pocket) | 1 |
| 1011573 | 216-505 | 20″ x 20″ x 12″ (6-pocket) | 1 |
High-efficiency cartridge filters are used to collect powder dust in powder recovery booths and in safe air dust collection systems. They are high-strength filter media, featuring a flame-retardant treatment.
| New Part No. | Old Part No. | Size | Quantity per Box |
| 1011682 | 216-202 | 26″ x 12 3/4″ (metal and wood) | 1 |
| 1011683 | 216-203 | 26″ x 12 3/4″ (cellulose) | 1 |
| 1011684 | 216-204 | 26″ x 12 3/4″ (fiberous) | 1 |
| 1022982 | 216-208 | 52″ x 12 3/4″ | 1 |
GFS products are designed and manufactured to meet the applicable requirements of various industry-recognized codes and standards.
Please be aware that local requirements may vary from national codes. GFS recommends consulting with your local authority before purchasing paint booths or other finishing equipment.
GFS engineers regularly contribute to the advancement of codes and standards that affect the industries that we work in. Several of our engineers serve on various NFPA Technical Committees responsible for key finishing industry standards.
GFS offers an extensive selection of paint booth filters designed to maximize performance while maintaining regulatory compliance, including multi-stage filtration systems and HEPA-certified models. Some examples include:
GFS Wave Filters
GFS Wave filters have a “wave” design that increases their surface area to improve depth loading and holding capacity. They minimize paint run-off, reducing the need to clean the booth floor and allowing for fast filter changes.
Exhaust Filters
Exhaust filters capture air and remove overspray and volatile compounds before returning it to the booth environment. You can choose from multiple options, including high-performance filter media, panel filters, fiberglass filters and gold polyester filters.
Intake Filters
Intake filters pull air into the booth from outside, eliminating airborne debris before it settles on wet paint. Available models include intake pads, tacky roll media and high-temperature roll media.
Air Make-Up Unit (AMU) Filters
AMU filters clean the air entering the unit, ensuring a consistent, economical source of replacement air.
Paper Filters
Paper filters are designed to eliminate overspray and dust from the booth environment. They come in multiple configurations, including pleated cardboard, paper mesh with a polyester backing and paper mesh without backing.
This is not an exhaustive list of the filters GFS provides. Please contact us to learn more about the filters we offer and which would be best for your shop.
Dirty, overloaded filters compromise booth performance. Overspray that isn’t removed introduces tiny particles that can affect paint jobs, making the finish look sloppy. Dirty filters also may be flammable, leading to unsafe working conditions. Your shop may even run afoul of regulatory codes if your paint booth filters cannot effectively clean the air in your workspace.
In extreme circumstances, clogged filters could take your booth offline, leading to unexpected downtime and lost revenue. Regular filter changes help ensure your shop remains as productive as possible.
The timing of filter changes depends on three major variables: process, environment and equipment.
Process
Filter shelf life is determined by operational hours when air flows through the system, not time since installation or the last filter change. A busier shop will need more frequent filter changes.
Environment
Intake filters draw outside air in, so the quality of that air impacts filter performance. If your shop is located somewhere with a high pollen count or excessive dust, your filters work harder and won’t last as long.
Equipment
Filters have variable life expectancies based on how they function and the quality of materials used to manufacture them. Fortunately, replacement schedules usually remain consistent.
Generally, intake filters last longer than exhaust filters. GFS offers manometers to track exhaust filter performance, letting you know when it’s time for a change. Our comprehensive maintenance program can also ensure you never miss a needed filter change.
Global Finishing Solutions has more than 50 years of experience serving multiple industries, including automotive refinishing, commercial aerospace and aviation, industrial manufacturing, woodworking, and defense. We understand the practical needs of the businesses that use our products and have the expertise required to help them reach their goals.
Our vertically-integrated manufacturing process means GFS controls every step from design and fabrication to installation and long-term service. Our reputation for high-quality, code-compliant solutions that perform in the most demanding environments differentiates us from competitors.
We also have an extensive distribution network, with reach throughout North America. Many of our products are kept in stock and available for immediate shipping.
Most importantly, safety and code compliance are our top priorities. GFS engineers regularly contribute to codes and standards across multiple industries, and all our products are designed to meet the stringent standards of organizations such as the Occupational Safety and Health Administration (OSHA), Underwriters Laboratories (UL) and the National Fire Protection Association (NFPA).
Yes. GFS offers additional services to meet your needs.
Our extensive product training program provides personalized guidance on how to maintain your filters based on which ones you select, your shop’s production volume and the coating type.
If you take advantage of our maintenance program, we can change your booth’s filters for you during quarterly or annual visits.
Ultimately, GFS views our customers as partners. We’ll provide expert insight into what you need, help you find the right filter and ensure that it still meets your needs long after your booth is up and running.
Global Finishing Solutions makes a perfect partner even if we didn’t manufacture your paint booth. We can help protect your technicians, coatings and surrounding environment by matching filters to your specific booth. We offer an extensive selection of OEM filtration systems and can service paint booth filters even if we didn’t manufacture them. In fact, we have experience with more than 20 different booth brands.
OEM parts won’t violate your warranty, and many systems are designed around them, including ours. Just as you wouldn’t buy the cheapest motor oil for a high-performance luxury car, you shouldn’t throw the least expensive filter you can find into a high-end paint booth. Your booth is an investment in your business, and you want it operating at peak performance.
Global Finishing Solutions is proud to offer a personalized experience to every prospective customer. Get started by requesting an automotive refinish quote or an industrial products quote today, and we’ll connect you with a knowledgeable local distributor who can help you explore different spray booth filters and guide you through the ordering and installation process.
Need immediate assistance? Contact us to start working with a finishing expert in your area. We’re looking forward to hearing from you.
Let us know your product requirements, and we will put you in touch with a distributor in your area.
FINAL
Friday, July 11
What you need to know to make the best paint booth investment.