Dramatically reduce curing time with REVO Speed. It quickly cures fillers and coatings completely from the inside out, saving significant time and money. This fast-positioning model is best suited for body shops that perform large volumes of average repairs on one to four panels. With a vehicle clearance of 7 feet, the REVO Speed can accommodate all sizes of passenger vehicles, including cars, trucks, minivans and SUVs, as well as factory lifted trucks.
Quickly and easily position the REVO Speed to automatically move based on specifications set into the control panel. There is no need to scan a vehicle or use special plates or markers. Simply place the REVO Speed at the beginning of a vehicle and it will move on its own. The unit returns back to its starting position with the touch of a button.
Up to 80% More Paint Shop Throughput
REVO Speed uses short wave, electric infrared curing technology to offer the fastest curing time in the industry for both prep and paint processes. It shortens repair cycle time and significantly reduces rework. Plus, it easily installs within existing shop footprints.
Quick Heating & Cooling Times
Lamps on the REVO Speed reach curing temperature almost instantly. Built in fans cool the unit down in seconds. The system can be turned on only when needed and is safe to touch shortly after being turned off.
Simple-to-operate, high-tech controls make consistent, high-quality results easy. The travel speed and surface temperature are preset, so there’s no guesswork for technicians on cure time. Just select the type of material being cured and the lamp sections to be turned on/off during the cure process; then press start.
Expert Support & Service
All REVO Systems are backed by Global Finishing Solutions to provide support and reliability. Each system has been expertly designed specifically for the automotive repair industry. And with on-site training available, learning to use any REVO System is easy.
Cures both filler and coatings from the inside out. REVO infrared curing technology creates a high-quality, complete cure using significantly less energy and reduces the out-of-dust time to just minutes. The ability to turn the lamps on and off helps save on energy and operating costs.
Short Wave Infrared Technology
Transforming Collision Repair
REVO Accelerated Curing Systems use short wave electric infrared technology, which provides significant throughput gains, energy cost savings and quality improvements.
Curing time for both prep and paint phases of repair can be reduced by hours, freeing up your technicians to complete additional repairs. There is no need to add accelerators to speed curing time; the fast dry time and complete cure from electric infrared curing technology delivers high quality results that reduce the need for rework.
Electric infrared energy costs are a fraction of the energy costs to run a conventional system. REVO systems take just a fraction of a second to heat up and are ready to cure a repair immediately. Cool down is also very quick so the systems can be turned on only when needed and are safe to handle shortly after shutdown.
REVO Systems deliver consistent, controlled heat. Temperature is precisely regulated by easy-to-operate controls. With short wave infrared curing technology, the drying energy is concentrated on only the panels needing repair and penetrates multiple layers of coatings to heat the substrate beneath. REVO Systems consistently cure primer, sealer and paint.
ULTRA® XR PAINT BOOTH
The Ultra® XR Paint Booth is a premium downdraft spray booth that is integrated seamlessly with the REVO Speed — creating a top-of-the-line spraying and curing environment.
Integrated overhead rails allow the REVO Speed to move independently alongside the vehicle, curing coatings as it moves
Exclusive Controlled Airflow Ceiling for superior contamination control
Premium ceiling and vertical sidewall lighting
Intuitive LOGIC 4 controls with dual VFDs
Pressurized parking garage and pressurized power rails make the booth fully compliant with NFPA 33
The Ultra® XR Closed-Top Open-Front (CTOF) is an end-to-end prep, paint and curing environment. By integrating REVO Systems into this versatile finishing environment, vehicles can be filled, primed, sealed, painted and rapidly cured in one location.
Built-in overhead rail system allows REVO Speed or Rapid to easily move alongside the vehicle or panels
Downdraft airflow with GFS’ exclusive Controlled Airflow Ceiling for superior contamination control
Rapidly cure fillers and coatings in three minutes or less with the REVO Handheld. This powerful, lightweight tool is ideal for fast spot repairs, but can also be used for a variety of other applications. With the REVO Handheld, you can soften glass seals, heat up aluminum to repair aluminum-body vehicles, push out a dent, or remove emblems, vinyl graphics and adhesives. The REVO Handheld allows you to get more repairs done faster, saving you time and money.